The main features of the wheel loader L 524 2plus1 are cost-effectiveness and environmental-friendliness. In practice, this wheel loader consumes up to 25 percent less fuel than comparable machines from other manufacturers under the same operating conditions. This wheel loader is equipped with a 2plus1 gearbox. Tractive force and speed are adapted to suit demand automatically and without gear changes. Even the change from forward to reverse travel is controlled hydraulically, so that no mechanical reverse gear is required.
GENERAL INFORMATION
Manufacturer
Liebherr
Model Year
2010
Model
L 524 2plus1
MSRP
Request a Quote
DIMENSIONS
Weight
23,370 lbs. (10,600 kg)
DRIVETRAIN
Transmission Type
Stepless hydrostatic travel drive design "2plus1", swash plate type variable flow pump and 2 variable axial piston motors in closed loop circuit and axle transfer case 2plus1. Direction of travel is reversed by changing the flow-direction of the variable-displacement pump.
117 hp (86 kW) at 2,400 rpm (rated output according to ISO 9249)
Displacement
274.6 ci (4.5 l)
Torque
317.2 ft. lbs. (430 Nm) at 1,500 rpm
Cooling
Water-cooled, intercooled
Fuel Tank Capacity
44.9 gal. (170 l)
BATTERY
Voltage
24V
Amps
Alternator: 3-phase AC 55A
HYDRAULICS
Hydraulic System
Capacity: 44.9 gal. (170 l)
Hydraulic Tank Capacity
29.1 gal. (110 l)
Opt Pump Flow
Maximum Flow: 27.7 gpm (105 l/min)
OPERATIONAL
Tipping Load
16,090 lbs. (7,300 kg)
Bucket Capacity
2.6 cu. yd. (2.0 cu. m)
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
